Msta^i,in, Warning – Whirlpool 3QACM07XD2 User Manual

Page 13

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

msTA^i,iN«

aih

Slide the chassis into the cabinet. Install
the cabinet seal (accessory part) between
the cabinet and the frame/wall.

8. Reinstall the shipping bracket and attach

with screws (2).

10. Remove slide-out filter from front panel.

Replace the front panel. Insert tabs into

slots on the top flange of the cabinet.

Rotate the front panel downward until it

fits snugly between cabinet side flanges.
Secure front panel with 2 round-head
screws (accessory parts). Replace slide-
out air filter.

NOTE: Make sure the Exhaust Door
Control lever is between the frame and

the first air discharge louver before
securing front panel with screws.

9. Reconnect the green and yellow

grounding wire.

^WARNING

Electrical Shock Hazard

Connect ground wire when unit is in
cabinet.

Failure to do so will result in electrical
shock.

nnininniniinininiinininiiiii!

iimiinmmmmiijmimiinnimi