Installation procedure – Whirlpool 3QACM07XD2 User Manual

Page 12

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

INSTALLING YOUR AIR CONDITIONER

Installation procedure

1. Remove the front panel. Remove tape (it

any). Lift panel and take it off the cabinet.

2. Remove the shipping brackets (2).

Remove the cabinet ground screw (1)
and disconnect the green and yellow
grounding wire.

3. Remove the rear shipping screws (2).

4. Slide the chassis out of the cabinet.

5. Install the drain plug and drain cup

(accessory parts) to rear of cabinet. Slide
drain cup down into rear support between

grooves in cup.

NOTE; Attach drain plug and drain cup
assemblies and attach hose before
sliding unit into cabinet.

6. Fix the cabinet to the support frame.