Whirlpool 3QACM07XD2 User Manual
Page 11
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
INSTALLING YOUR AIR CONDITIONER
* Provide adequate drainage.
Tilt unit
toward
outside so
unit drains
to the rear.
5 to 10 mm
Install drip cup,
if required.
Provide additional support for unit if
required.
Support frame
Provide adequate clearance so the air filter
can be removed from the bottom of the
front panel.
Must be
able to
remove
air filter
Electrical requirements
Check the model and serial number label to
determine the electrical requirements of your
unit. ALL units must use a time delay fuse or
circuit breaker.
Grounding method
Your air conditioner is equipped with a
power supply cord containing a 3-prong
grounding plug. To minimize possible
electrical shock hazard, the power supply
cord must be plugged into a mating 3-prong,
grounding-type wall receptacle, which is
grounded in accordance with all applicable
codes. If a mating wall receptacle is not
available, it is the personal responsibility and
obligation of the customer to have a properly
grounded 3-prong wall receptacle installed
by a qualified electrician.
Power supply
DO NOT disconnect the air conditioner from
its electrical supply. DO NOT use an electri
cal outlet that can be turned off with a
switch.
11