Whirlpool DRYERS - Manual (Page 16)

O P E R A T I N G Y O U R D R Y E R
Cycle control knob and a temperature selector (4 settings)
I II i MKJ ryllK.)
e y c k . )
|-;r Lu.,ird I'l.'.li to btart
Cycle control knob Temperature aelector
(aaleclora vary with model)
End of cycle
RNISH GUARD*
selector
Start button
If your dryer has a Temperature Selector with
4 temperature settings (ex low, low, med,
high), refer to the chart below and the chart on
page 9 for cycle information.
Loads tumbie without heat during the last
few minutes of all heated cycles. This makes a
load easier to handle and helps keep wrinkles
from setting in.
Using your automatic cycle
Use your automatic cycle and a heat setting to
automatically dry most loads. The chart below
suggests heat settings for various types of
loads.
Using Heavy Dry
(on some models)
Use Heavy Dry and a high heat setting to dry
large items or items that are thicker or heavier
than a regular load (heavy cotton bath sheets
or robes).
NOTE: To help reduce wrinkling, remove the
load from the dryer as soon as tumbling stops.
This is important for permanent press, knits
and synthetic fabrics. Do not overdry.
Overdrying can cause shrinkage, static cling,
and damage some fabrics.
TYPE OF LOAD AUTOMATIC CYCLE
COTTONS AND LINENS
Extra Heavy-Bedspreads, mattress pads, quilts HIGH
Heavyweight-Towels, jeans, corduroys, work clothes HIGH
Mediumweight-Sheets, cotton underwear, diapers
MED
Lightweight-Batistes, organdies, lingerie LOW
PERMANEm' PRESS, SYNTHETICS AND BLENDS
Heavyweight-Work clothes, jackets, raincoats
HIGH
Mediumweight-Shirts, play clothes, sheets, slacks MED
Lightweight-Lingerie, blouses, dresses LOW
KNITS
Heavyweight-Cottons, rayons, blends, T-shirts, slacks,
shirts
HIGH
Mediumweight-Synthetics (polyester, acrylic, etc.), dress
slacks, skirts, sweaters
MED
Lightweight-Synthetics (polyester, acrylic, etc.) and
blends, lingerie, blouses, dresses
EX LOW
DELICATE FABRICS
Sheer curtains (2 or 3 panels), gauze, lace, etc.
EX LOW
16