Operating ybur l/vasher, Before starting your washer, Starting or stopping your washer – Whirlpool LLC7244BQ0 User Manual
Page 5: Starting your washer, Stopping and restarting your washer, Operating your, Washer
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Cl
P E R A T I N G Y O U R W A S H E R
Operating Ybur l/Vasher
In This Section
Page
Page
Before atarting your washer......................... ............5
Sel acting a cycie and time.................... ................. 8
Starting or stopping your waaher................. ............5
Usi ng rinse and spin............................. ............... 10
Selecting a load size............... ...............
............6
Usi ng drain and spin............................ ............... 10
Selecting wash-rinae temperatures.............. ............6
Wh at happens in each cycle.................
Selecting agitation-spin speeds.................... ............7
Operating your washer properly ensures maximum wa shing efficiency. This section gives you
important information to help you to select a cycle, timo, and temperature for your wash load.
Before starting your washer
Add measured detergent. Then place a sorted
load in the washer before starting. See page 14
for additional ‘Before you wash” information.
NO TE: If your washer has a Consumer
Feiiture Guide, remove it and place it in your
Uso and Care Guide.
Permanent
Press
Starting or stopping your washer
Starting your washer
1. Select a load size and water temperature.
2. Push in and turn the Cycle Control Knob
clockwise. Stop when the indicator on the
knob’s outer ring points to the number in the
wash cycle you want. The numbers are
minutes of wash time.
3. Pull out the Cycle Control Knob.
Refer to pages 6-10 for additional information
to help you make selections.
Stopping and restarting your
washer
• To stop the washer at any time, push in the
Cycle Control Knob.
• To restart the washer, close the lid (if neces
sary) and pull out the Cycle Control Knob.
Pull Start
Push Stop
Super Wash
Cycle may vary with model