Using the fabric softenei' dispenser, Using the chlorine bleach dispenser – Whirlpool LLC7244BQ0 User Manual
Page 13
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

O T H E R F E A T U R E S
Using the fabric softenei' dispenser
(on some models)
1. Add detergent and load the basket.
2. Add liquid fabric softener to the dispenser
using the amount recommended on the
package. Avoid dripping or spilling any
fabric softener on the load.
3. Dilute fabric softener with warm water. Fill
dispenser with warm water until liquid
reaches the cross-bar in the pouring well.
4. Start the washer. Diluted fabric softener will
be added to the load during the final rinse.
NOTE: Do not stop the washer before the
final rinse begins. Staining can occur.
Flush dispenser periodically with warm water.
• To remove the dispenser, grasp the top of
the dispenser with both hands. Squeeze and
push upward with thumbs to remove.
• Clean dispenser by holding under water
faucet. Replace after cleaning.
NOTE: Do not wash clothes with dispenser
removed. Do not add detergent or bleach to
dispenser. The dispenser can clog.
Dilute fabric softener
with warm water to
the cross-bar
Add fabric softener and water
Using the chlorine bleach dispenser
(on some models)
Always measure liquid chlorine bleach. Do not
guess. Never use more than 1 cup (250 mL) for
a full load. Use less with lower water level
settings. Follow manufacturer’s directions for
safe use. Use a cup with a pouring spout to
avoid spilling.
1. Load the washer.
2. Pour measured chlorine bleach carefully into
dispenser. Do not let bleach splash, drip or
run down into washer basket. Undiluted
bleach will damage any fabric it touches.
3. Start the washer. Bleach will be diluted
automatically during wash part of cycle.
NOTE: Do not add powdered chlorine or all
fabric bleach to the dispenser. The dispenser
can clog.
13