Whirlpool 9200 SERIES - Manual (Page 10)

Operating Instructions
Continued
POT&PANS
HEAVY
NORMAL
LOW ENERGY
RINSE & HOLD
CYCLE
HEAT DRY
AIR DRY
HI - TEMP
OPTI
□ HEAT DRY
AIR DRY
HI-TEMP
Rinse & Hold Cycle
For rinsing a few items to be washed one or more
days later. Cycle time is about 12 minutes.
What happens in each option
Options can be selected by pressing the OPTIONS
pad. Each press of the pad advances the selection
to the next option. You can select Heat Dry, Heat
Dry and Hi-Temp, Air Dry,or Air Dry and Hi-Temp.
For example, if the AIR DRY signal light is on and
you want to select the Heat Dry Option, press the
OPTIONS pad twice.
NOTE:
• All options can be changed any time during
a cycle.
• The Hi-Temp Option is preset for the Pots &
Pans Cycle, only Heat Dry or Air Dry Options
can be selected.
• If the Rinse & Hold Cycle is selected, options
are not available.
Heat Dry Option
The HEAT DRY signal light will be on when the
Heat Dry Option is selected. Heat dry means the
air in the dishwasher is heated during the "dry"
portion of any cycle - except the Rinse & Hold
Cycle.
For best drying results, use a liquid rinse agent
such as Jet-Dry.'
Air Dry Option
The! AIR DRY signal light will be on when the Air
Dry Option is selected. The Air Dry Option helps
save energy, but the load takes longer to dry (over­
night) and some spotting may result. Some items
(such as plastics) may need towel drying.
For best drying results, use a liquid rinse agent
such as Jet-Dry. *
Hl-Temp Option
When the Hi-Temp Option is selected, water for
the first wash (if present), main wash and the final
rinse is heated to 140°F (60°C). While the water is
heating, the WATER HEATING signal light will be
on. Pots &.Pans Cycle has the Hi-Temp Option
preset. Hi-Temp Option cannot be selected with
the Rinse & Hold Cycle.
10