Whirlpool FGS395Y - Manual (Page 11)

U S I N G Y O U R R A N G E
The electronic oven control
Cancel
button
Display
Time/Temp
Set Knob
Timer Clock
on/off button
button
Bake Stop
time time
button button
Clean Broil Bake
button button temp
button
Display/clock
• When you first plug in the range, the display
will flash until you set a new time. If after you
set the clock (page 12) the display again
flashes, your electricKy has been off. Reset the
clock.
• When you are not using the oven, this is an
accurate clock.
• When using the oven or Timer, the display
will show the time, temperature settings and
what command buttons have been pushed.
• When showing the time of day, the display
will show the hour and minutes.
• When using the Timer, the display will show
hours, minutes and seconds in the following
sequence:
- For settings from 0-1 minute 55 seconds,
the display will increase in 5-second incre­
ments and count down each second.
- For settings from 2-10 minutes, the display
will increase in 10-second increments and
count down each second.
- For settings from 10-60 minutes, the
display will increase in 1-minute increments
and count down each second.
- For settings from 1 hour-9 hours 50
minutes, the display will increase in 5-minute
increments and count down each minute.
• When using Bake Time and/or Stop Time,
the display will show hours and minutes.
Command buttons
The command buttons tell the oven what to do
and in what order. A few examples:
- Clock tells the oven you are going to set the
clock.
-Cancel tells the oven to turn off.
Each command button (except Cancel) has its
own light. The light comes on when you push the
command buttons.
Time/temp set knob
Once you’ve pushed a command button to tell
the oven what you want it to do, you’ll use the
Time/Temp Set Knob to set a temperature or
time. Turning the Time/Temp Set Knob clockwise
increases the number on the display. Turning the
Time/Temp Set Knob counterclockwise de­
creases the number on the display.
11