Before setting the controls, Make sure the oven door is completely closed, Setting the controls – Whirlpool RBS307PD User Manual
Page 34: Press auto clean pad, Press, You see, Set cleaning time (optional), Example for 4v^hour cycle)
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
USING THE SELF-CLEANING CYCLE
Before setting the controls
•Make sure clock is set to correct
time of day. (See “Setting the
clock” on page 10.)
•Make sure the oven door is
completely closed.
Setting the controls
NOTE: Displays shown are from single/
upper ovens. Command pads shown are
from double ovens. In some cases, lower
oven displays and single oven command
pads may look different than those shown.
NOTE: On double ovens, you cannot run a
Self-Cleaning cycle in both ovens at the
same time. Also, if you are setting a Self
Cleaning cycle for the lower oven the control
will not let you program any other function in
the upper oven.
To start cleaning immediately:
1. Press Auto Clean pad.
A 3V2-hour Self-Cleaning cycle will be
set automatically.
PRESS
YOU SEE
C t r i
2. Set cleaning time (optional).
If you want a Self-Cleaning cycle longer
or shorter than
3
V
2
hours, use the Hour
pad to set the desired cleaning time.
Press the “up” (▲) or “down” (▼) pad(s)
until a time between
2
V
2
-
4
V
2
hours
shows on the display.
• Use
2
V
2
hours for light soil.
• Use
3
V
2
-
4
V
2
hours for moderate to
heavy soil.
PRESS
A
HR
V
YOU SEE
-
I
_
I M
(example for 4V^hour cycle)
34