Method 2-using stop time, Prepare oven, Choose setting – Whirlpool RBS307PD User Manual
Page 23: Press you see, Set temperature (optional), Press stop time pad, Set stop time, I c u u
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

U S I N G Y O U R O V E N
Method 2-Using Stop Time:
1. Prepare oven.
Position the oven rack(s) properly and
put food in the oven. For correct rack
placement, see “Positioning racks and
pans” on page 7.
2. Choose setting.
NOTE: On single/upper ovens, you can
set the oven for convection baking by
pressing CONVECT instead of BAKE.
PRESS YOU SEE
(example for
bake)
Zicn°' i n - n n
I C U U
3. Set temperature (optional).
Do this step if you want to set a tempera
ture other than 350°F. Press
A
to raise
the temperature or ▼ to lower the
temperature in 5°F amounts. Use these
pads until the desired temperature shows
on the small display. (If the Temp pads
are held down the temperature will
change faster.)
PRESS YOU SEE
I I Q ' '
/Ji-nn
j
i j f
i l
- U U
(example shows Bake at 375°F)
4. Press Stop Time pad.
PRESS
YOU SEE
5. Set stop time.
Press the “up”
(A) or “down” (T) pad(s)
until the correct time shows on the
display.
Example at right shows a desired stop
time of 2 o’clock. This provides a 2-hour
cook time (the difference between the
time of day and the stop time).
PRESS YOU SEE
(example shows 2 o’clock stop
time)
continued on next page
23