Carl Goldberg GBGA1084 - Manual (Page 13)

13
Wild Stick 120
1. Fit the landing gear to the bottom
of the fuselage and install the four
screws and flat washers. Use locktit
on the screws.
2. install the axels using the aircraft
lock nuts.
3. install the wheels using one wheel
collar on the inside and one on the
outside of the wheel.
locate the following parts:
1. landing gear
2. Two wheels
3. Two axels
4. two axel nuts
5. Four wheel collars
6. Six flat washers
7. Four mm screws
landing Gear