Grounding methods – Compaq 64-Bit User Manual
Page 51

B-2 Compaq StorageWorks 64-Bit/66-MHz Fibre Channel Host Adapter Installation Guide
Compaq Confidential – Need to Know Required
Writer: Liz M. Weiman Project: Compaq StorageWorks 64-Bit/66-MHz Fibre Channel Host Adapter Installation Guide Comments:
Part Number: 122833-002 File Name: k-appb Electrostatic Discharge.doc Last Saved On: 12/14/00 2:28 PM
Grounding Methods
There are several methods for grounding. Use one or more of the following
methods when handling or installing electrostatic-sensitive parts:
■
Use a wrist strap connected by a ground cord to a grounded workstation
or computer chassis. Wrist straps are flexible straps with a minimum of
1 megohm
± 10 percent resistance in the ground cords. To provide
proper ground, wear the strap snug against the skin.
■
Use heel straps, toe straps, or boot straps at standing workstations. Wear
the straps on both feet when standing on conductive floors or dissipating
floor mats.
■
Use conductive field service tools.
■
Use a portable field service kit with a folding static-dissipating work
mat.
If you do not have any of the suggested equipment for proper grounding, have
an Authorized Compaq Reseller install the part.
NOTE: For more information on static electricity, or assistance with product installation,
contact your Authorized Compaq Reseller.