beautypg.com

Chapter 6, Installing drivers for sco openserver 5.0, Chapter – Compaq 64-Bit User Manual

Page 34

background image

Compaq Confidential – Need to Know Required

Writer: Liz M. Weiman Project: Compaq StorageWorks 64-Bit/66-MHz Fibre Channel Host Adapter Comments:

Part Number: 122833-002 File Name: g-ch6 Installing Drivers for SCO OpenServer 5.0.doc Last Saved On: 12/14/00 2:24 PM

Chapter

6

Installing Drivers for SCO OpenServer

5.0

This chapter outlines the driver installation steps for the SCO OpenServer 5.0
operating system for the 64-Bit/66-MHz Fibre Channel Host Adapter. If you
are setting up a new system, download the drivers from the Compaq website at
www.compaq.com.

Before installing the drivers, you must:

■

Update your system firmware by running System ROMPaq (see
Chapter 2).

■

Configure the hardware by running the System Configuration Utility.

See also other documents in the category Compaq Hardware: