Compaq 64-Bit - Manual (Page 42)

8-2 Compaq StorageWorks 64-Bit/66-MHz Fibre Channel Host Adapter Installation Guide
Compaq Confidential – Need to Know Required
Writer: Liz M. Weiman Project: Compaq StorageWorks 64-Bit/66-MHz Fibre Channel Host Adapter Installation Guide Comments:
Part Number: 122833-002 File Name: i-ch8 Installing Drivers for UnixWare.doc Last Saved On: 3/6/01 10:01 AM
NOTE: If you install the operating system software from the latest version of the
SmartStart and Support Software CD, all software, including device drivers, will be
automatically installed and configured for the 64-Bit/66-MHz Fibre Channel Host Adapter.
Materials Needed to Install Drivers using Compaq
SmartStart and Support Software CD
The following items are necessary to create a set of Compaq EFS diskettes for
UnixWare.
■ SmartStart and Support Software CD
■ Five blank diskettes
■ A server or workstation with a bootable CD-ROM drive running
Windows
NOTE: You can use the system in which you are installing the 64-Bit/66-MHz Fibre
Channel Host Adapter.
Creating the EFS Diskettes
To create the Compaq EFS diskettes for UnixWare:
1. Start the server from the SmartStart and Support Software CD.
2. From the Compaq System Utilities screen, select Create Support
Software.
3. From the Diskette Builder screen, select Create Support Software
Diskettes.
4. Scroll through the list and select Compaq SCO UnixWare EFS.
5. Follow the instructions on the screen to create and label the diskettes.