Cadillac 2010 Escalade User Manual

Page 540

Black plate (92,1)

Cadillac Escalade/Escalade ESV Owner Manual - 2010

4. Repeat this procedure at least two times. If the

spare tire lowers to the ground, continue with
Step 5 of Removing the Spare Tire and Tools on
page 7‑81.

5. If the spare does not lower, turn the wrench

counterclockwise until approximately 6 inches
(15 cm) of cable is exposed.

6. Stand the wheel blocks on their shortest ends, with

the backs facing each other.

7. Place the bottom edge

of the jack (A) on the
wheel blocks (B),
separating them so that
the jack is balanced
securely.

8. Attach the jack handle, extension, and wheel

wrench to the jack and place it (with the wheel
blocks) under the vehicle toward the front of the
rear bumper.

7-92