Led lighting, Back-up lamps, Led lighting -55 – Cadillac 2010 Escalade User Manual

Page 503: Lamps -55

Black plate (55,1)

Cadillac Escalade/Escalade ESV Owner Manual - 2010

LED Lighting

The vehicle may have LED headlamps.
For replacement of the LED lighting assembly
contact your dealer.

Back-Up Lamps

To replace this bulb:

1. Open the liftgate.

2. Remove the two

screws from the
taillamp assembly.

3. Pull the taillamp assembly rearward until you

disengage the inner pins on the taillamp assembly
from the vehicle.

4. Press the release tab, if the bulb socket has one,

and turn the socket counterclockwise to remove it
from the taillamp assembly.

5. Pull the old bulb straight out from the socket.

6. Press a new bulb into the socket, insert the socket

into the taillamp assembly and turn the socket
clockwise into the taillamp assembly until it clicks.

7-55