Cadillac 2012 SRX - Manual (Page 379)

Black plate (39,1) Cadillac SRX Owner Manual (Include Mex) - 2012
Vehicle Care 10-39
4. Remove the two screws from the
taillamp assembly.
5. Pull the taillamp assembly
straight back to remove.
A. Turn Signal Lamp
B. Back–Up Bulb/Socket
Assembly
6. Disconnect the wire
harness from the back–up
bulb/socket (B).
7. Turn the back–up bulb socket
counterclockwise to remove it
from the taillamp assembly.
8. Install a new bulb/socket
assembly into the taillamp
assembly and turn the bulb/
socket clockwise until it clicks.
9. Reinstall the taillamp assembly
and tighten the screws.
10. Reinstall the taillamp cover by
snapping it into place.
11. Push the push pin to secure
the taillamp cover.