Cadillac 2012 SRX - Manual (Page 376)

Black plate (36,1) Cadillac SRX Owner Manual (Include Mex) - 2012
10-36 Vehicle Care
8. Install the cap with the down
arrow pointing down in the back
of the headlamp assembly.
9. For driver side, reinstall the
underhood electrical center
cover by latching three clips.
10. For passenger side, reinstall
the air filter/cleaner assembly
base by pushing to seat.
Verify the base is seated
securely, then install the engine
air filter/cleaner assembly.
High/Low‐Beam Headlamps
(Uplevel)
The high/low beam headlamps
on the uplevel are High Intensity
Discharge (HID) and should be
replaced at the dealer.
Daytime Running Lamp (DRL)
(Uplevel)
1. From the back side of the
headlamp assembly, remove
the bottom cap to replace the
DRL bulb.
2. Disconnect electrical connector.
3. Remove the DRL bulb socket
from the headlamp assembly.
4. Replace the bulb in the bulb
socket.
5. Install the bulb socket in the
headlamp assembly.
6. Connect the electrical connector.
7. Install the cap with the down
arrow pointing down in the back
of the headlamp assembly.
8. For driver side, reinstall the
underhood electrical center
cover by latching three clips.
9. For passenger side, reinstall
the air filter/cleaner assembly
base by pushing to seat.
Verify the base is seated
securely, then install the engine
air filter/cleaner assembly.