Cadillac 2012 SRX - Manual (Page 162)

Black plate (30,1) Cadillac SRX Owner Manual (Include Mex) - 2012
5-30 Instruments and Controls
Timer
This display can be used as a
timer. To start the timer, press
SET/CLR while Timer is displayed.
The display will show the amount
of time that has passed since the
timer was last reset. To stop the
timer, press SET/CLR briefly while
Elapsed Time is displayed. To reset
the timer to zero, press and hold
SET/CLR.
Distance to Destination
This display will show the vehicle
distance with estimated time of
arrival to destination. The value
can be cleared or reset by pressing
the SET/CLR button. Move the
thumbwheel up or down to increase
or decrease the destination distance
value. Once the distance value is
set, press SET/CLR to confirm the
value.
Turn-by-Turn
This display is used for the OnStar
or Navigation System Turn-by-Turn
guidance. See OnStar Overview on
page 14‑1 or the navigation manual,
if the vehicle has navigation, for
more information.
Speed and Curve Assist
This display will show the speed
limit or the advised speed as
determined by the information
provided by the navigation system.
The map database loaded in the
navigation system may need to
be updated periodically to display
accurate information. See “Maps”
in the navigation manual for
information on updating the map
database.
Digital Speedometer
The speedometer shows how
fast the vehicle is moving in either
kilometers per hour (km/h) or miles
per hour (mph). The speedometer
cannot be reset.
Blank Display
This display shows no information.
Vehicle Information Menu
Items
Press the MENU button on the
turn signal lever until Vehicle
Information Menu is displayed.
Use the thumbwheel to scroll
through the following possible
menu items:
. Unit
. Speed Warning
. Battery Voltage
. Remaining Oil Life
. Tire Pressure
. Blank