beautypg.com

Headlamp aiming, Headlamp aiming -28, 28 vehicle care – Cadillac 2012 SRX User Manual

Page 368

background image

Black plate (28,1)

Cadillac SRX Owner Manual (Include Mex) - 2012

10-28

Vehicle Care

To remove the wiper blade:

1. Lift the wiper arm away from the

windshield.

A. Wiper Arm

B. Release Lever

C. Blade Assembly

2. Push the release lever (B) to

disengage the hook and push
the wiper arm (A) out of the
blade assembly (C).

3. Push the new blade assembly

securely on the wiper arm until
the release lever clicks into
place.

4. Replace wiper cover.

Headlamp Aiming

The headlamp aiming system has
been preset at the factory.

If the vehicle is damaged in an
accident, the aim of the headlamps
can be affected and adjustment
could be necessary.

It is recommended that a dealer
adjust the headlamps. To re-aim
the headlamps yourself, use the
following procedure.

The vehicle should be properly
prepared as follows:

.

The vehicle should be placed so
the headlamps are 7.6 m (25 ft)
from a light-colored wall.

.

The vehicle must have all four
tires on a level surface which is
level all the way to the wall.