Cadillac 2012 SRX - Manual (Page 163)

Black plate (31,1) Cadillac SRX Owner Manual (Include Mex) - 2012
Instruments and Controls 5-31
Unit
Move the thumbwheel up or
down to switch between metric
or English when the Unit display
is active. Press SET/CLR to confirm
the setting. This will change the
displays on the cluster and DIC
to either metric or English
measurements.
Speed Warning
Speed Warning allows the driver
to set a speed that they do not
want to exceed. To set the Speed
Warning, press SET/CLR when
Speed Warning is displayed. After
selecting ON, use the thumbwheel
to increase or decrease the desired
speed limit. The value can be set
from 0-250 km/h (0-160 mph). Press
SET/CLR to confirm. If the selected
speed limit is exceeded, a pop-up
warning is displayed with a chime.
Battery Voltage
This display, available on some
vehicles, shows the current battery
voltage. If the voltage is in the
normal range, the value will display.
For example, the display may read
BATTERY VOLTAGE 15.0 VOLTS.
The vehicle's charging system
regulates voltage based on the
state of the battery. The battery
voltage can fluctuate while viewing
this information on the DIC. This is
normal. See Charging System Light
on page 5‑18 for more information.
If there is a problem with the battery
charging system, the DIC will
display a message. See Battery
Voltage and Charging Messages on
page 5‑32.
Remaining Oil Life
This display shows an estimate
of the oil's remaining useful life.
If REMAINING OIL LIFE 99% is
displayed, that means 99% of the
current oil life remains.
When the remaining oil life is
low, the CHANGE ENGINE OIL
SOON message will appear on the
display. See Engine Oil Messages
on page 5‑35. The oil should be
changed as soon as possible.
See Engine Oil on page 10‑8.
In addition to the engine oil life
system monitoring the oil life,
additional maintenance is
recommended in the Maintenance
Schedule in this manual.
See Maintenance Schedule on
page 11‑4 for more information.
Remember, the Oil Life display
must be reset after each oil change.
It will not reset itself. Also, be
careful not to reset the Oil Life
display accidentally at any time
other than when the oil has just
been changed. It cannot be reset
accurately until the next oil change.
To reset the engine oil life system,
press the SET/CLR button while
the Oil Life display is active.
See Engine Oil Life System on
page 10‑10.