C&D Technologies RS-1826 Liberty Series 1000 FA Battery User Manual

Page 30

Appendix C - VALVE-REGULATED LEAD ACID BATTERY and

CHARGER INSPECTION REPORT

A sample inspection report form is provided in the following pages of
this manual and is referred to as

RS-1511

. This form should be used

to record appropriate battery, charger and related system information
at timely events such as:

• Initial installation of the battery at which time open circuit voltage

of all cells should be recorded.

• The initial charge is provided at equalize or float voltage (if first

charge is provided within a short time after receipt of battery).

• The system is finalized and float voltage is established to the battery.

• Whenever equalize charge is delivered to the battery to balance cell

potentials.

• At periodic maintenance.

• Following a deep discharge or capacity test.

Important information can be found on unit labels affixed to the
battery:

1 - Labels contain the:

• Battery Model or Type Identification
• Ampere-hour Rating (Ah)
• Shipping Date, from C&D TECHNOLOGIES Factory
• Order Number

User Note: Make a photocopy of the RS-1511 form shown in the

following pages so that additional copies may be
made at subsequent inspections.