Boekel Scientific 281111-2 Orbitron V - Manual (Page 8)

8
working
No rotation a. Speed Adjustment
Knob is positioned
to off position.
b. An obstruction
prevents tray
rotation
c. Motor failure
a. Turn Speed
Adjustment Knob
clockwise until
desired rotation
speed is reached
b. Remove obstruction
c. Have unit checked
by a competent
service person
8.0 Maintenance and Service
All Boekel laboratory products are designed to comply with
IEC1010-1. No routine maintenance is required.
8.1 Cleaning
Disengage power cord prior to cleaning. If a spill occurs, use
appropriate clean-up procedures as required for radiation or
biohazard control. The outer casing can be cleaned with a cloth
dampened with water. Periodic inspection of the work surface
should be performed to ensure that the surface is clean and the
suction feet on the base of the unit adhere to the work surface to
stabilize the system for use. Do not immerse the Orbitron V in water.