Boekel Scientific 281111-2 Orbitron V - Manual (Page 5)

5
2.0 Product Information
The Boekel Orbitron V is a heavy duty 3-Dimensional gyratory mixer that
is designed for gentle as well as vigorous agitation, making it suitable
for a wide variety of applications. The Orbitron V is supplied with a 30
cm square platform and a non skid rubber mat.
3.0 Assembly
3.1 Unpacking the Unit
Remove the packing materials carefully, and retain for future
shipment or storage of the unit. Inspect for damage. Report all
shipping damage to the carrier immediately. Shipping damage is
covered by the carrier and repair/replacement for shipping
damages must be coordinated through the carrier. Complete and
return the Warranty Registration Card. Packages should contain:
Orbitron V
Power line cord
One 3/16” Hex key for tilt adjustment
Operating instructions
3.2 Installation
Place the Orbitron V on a clean, flat, and stable work surface to
ensure that the suction feet on the base of the unit will adhere to
the surface and adequately secure the system for use. Make sure
that the unit is placed a minimum of 8” from the edge of the
workbench and there is adequate clearance for the tray rotation to
ensure user safety.
4.0 Operation
4.1 Identification of Controls (See Figure 1)
The Power Switch controls power to the unit.
The Speed Adjustment Knob is used to increase or decrease the
rotational speed of the platform.
Note: The Orbitron V is equipped with a soft start motor control
feature. Upon activation of the speed control the motor will
have a three second delay and softly start the shaking
motion.
The Timer is used for timed operation. The maximum timer duration
is 12 hours.