AXEON AT-Series User Manual

Page 5

AT – Series User’s Manual
MKTF-205

DO NOT UNDER ANY CIRCUMSTANCE

OR OTHER DESCRIPTIVE LABELS FROM THE SYSTEM.

FEED WATER AND

Nothing has a greater effect on a reverse osmosis system than the feed water quality

NOTE: IT IS VERY IMPORTANT TO MEET THE MINIMUM FEED WATER

REQUIREMENTS. FAILURE TO DO SO WILL CAUSE THE MEMBRANES TO FOUL
AND VOID THE MANUFACTURER’S WARRANTY.

OPERATING LIMITS

NOTE: HIGHER TDS AND/OR LOWER TEMPERATURES WILL REDUCE THE

SYSTEM’S PRODUCTION.

REJECTION, RECOVERY AND

AT-Series reverse osmosis systems
capacities indicated by the suffix in the system’s name under the conditions listed
above. For example, the AT
the listed operating test conditions.

The amount of total dissolved solids (TDS) rejected by the membrane is expressed as
percentage. For example, a 98.5% rejection rate means that 98.5

DO NOT UNDER ANY CIRCUMSTANCE REMOVE ANY CAU

OR OTHER DESCRIPTIVE LABELS FROM THE SYSTEM.

FEED WATER AND OPERATION SPECIFICATIONS

Nothing has a greater effect on a reverse osmosis system than the feed water quality

NOTE: IT IS VERY IMPORTANT TO MEET THE MINIMUM FEED WATER

FAILURE TO DO SO WILL CAUSE THE MEMBRANES TO FOUL

AND VOID THE MANUFACTURER’S WARRANTY.

NOTE: HIGHER TDS AND/OR LOWER TEMPERATURES WILL REDUCE THE

REJECTION, RECOVERY AND FLOW RATES

everse osmosis systems are designed to produce permeate

capacities indicated by the suffix in the system’s name under the conditions listed
above. For example, the AT-500 produces 500 gallons per day of permeate

test conditions.

The amount of total dissolved solids (TDS) rejected by the membrane is expressed as
percentage. For example, a 98.5% rejection rate means that 98.5% of total dissolved

06/12

UTION, WARNING,

OPERATION SPECIFICATIONS

Nothing has a greater effect on a reverse osmosis system than the feed water quality.

NOTE: IT IS VERY IMPORTANT TO MEET THE MINIMUM FEED WATER

FAILURE TO DO SO WILL CAUSE THE MEMBRANES TO FOUL

NOTE: HIGHER TDS AND/OR LOWER TEMPERATURES WILL REDUCE THE

FLOW RATES

are designed to produce permeate water at the

capacities indicated by the suffix in the system’s name under the conditions listed

permeate water at

The amount of total dissolved solids (TDS) rejected by the membrane is expressed as a

% of total dissolved