AXEON CRO-Series - Manual (Page 3)

MKTF - 215
3
Introduction
This reverse osmosis systems features a four-stage prefilter, membrane and postfilter housed in a single cartridge. The fifth
stage, an in-line carbon filter, is placed between tank and faucet.
When properly maintained, this system will provide you with years of trouble-free service. The next sections contain
important information on the proper care and maintenance of your system, please take a few minutes to read through this
information.
The cartridges in this system must be replaced on a regular basis to maintain efficiency and to ensure high water quality.
These cartridges work together and must be replaced every 6-12 months. Any significant change in performance of the
system should be investigated promptly to avoid secondary damage or deterioration to other parts of the system.
CAUTION: Improperly installed systems could result in water damage due to leaks or flooding. Proper installation of this
system requires familiarity with standard sink plumbing and proper use of common hand and power tools. If you are not
familiar with standard sink plumbing and proper use of common hand and power tools or have any difficulty with the
installation of this system, consult a licensed professional, such as a contractor or plumber.
NOTE: This system has been designed for installation by licensed professionals, such as a contractor or plumber.
Stage Description
Replacement
Interval
1-4
4-Stage Cartridge
1) 20 micron sediment prefilter
2) Granular activated carbon prefilter
3) Reverse osmosis membrane
4) Granular activated carbon postfilter
12 months
5
Granular activated carbon postfilter
(inline between tank and faucet)
6-12 months