AOC L26W831 - Manual (Page 34)

32
NOTE:
*This model complies with the specifications listed below.
*Designs and specifications are subject to change without notice.
*This model may not be compatible with features and/or specifications that may
be added in the future.
*26” LCD TV Viewable image size: diagonal 660mm
Television System:
NTSC-M
PAL-M
PAL-N
HDMI Terminals:
HDCP compliant
E-EDID compliant
Supported scan rates: 1080i,720p, 480p,
480i
Channel Coverage:
VHF-L 55.25 MHZ ~157.25MHZ
VHF-H 163.25 MHZ~439.25MHZ
UHF 445.25 MHZ~801.25MHZ
VGA Terminals:
VGA INPUT:
Rear VGA (D-SUB 15 Pin) Input x1
E-EDID compliant
Supported scan rates:
640X480 /60Hz
800x600 /60Hz
1024X768 /60Hz
1366X768 /60Hz
720X400 /70HZ
Recommended: 1366X768 /60Hz
Audio INPUT: Headphone Mini-jack for
stereo (3.5Φ)
Power Source:
AC power supply: 100V~240 V, 50/60 Hz
Power Consumption
≤ 60 W
1 W in standby mode (power cord plugged in and
power OFF)
Dimensions:
Include Stand:
651.9mm(W) x 481.5mm(H) x
219.6mm(L)
Audio Power
2 W + 2 W, Internal Speaker
Weight: 8.8 kg(With Stand)
Video/Audio Terminals:
Rear AV x1
Audio Input x1( share with S-VIDEO)
Wall Mounting:
200X100 mm
(Wall mount kit is not included)
S-VIDEO INPUT:
Y : 1 V(p-p), 75 ohm, negative sync.
C : 0.286 V(p-p) (burst signal), 75
ohm
VIDEO/AUDIO INPUT:
VIDEO: 1 V(p-p), 75 ohm, negative sync.
AUDIO: 150 mV(rms)
Component INPUT:
Rear Component x1:
Y : 1V(p-p), 75 ohm, including sync.
Pr/Cr: ±0.35V(p-p), 75 ohm
Pb/Cb: ±0.35V(p-p), 75 ohm
AUDIO: 150 mV(rms)
Supported resolutions:1080i, 720p, 480p,
480i
Supplied Accessories:
Remote Control
Two (AAA) Batteries (Except Argentina)
Base
Three M4 screws (to attach the Base to the
stand)
Power Cord
Signal cable
Audio cable
User Manual
Quick Setup Guide
PRODUCT SPECIFICATION