AOC LC32H063D - Manual (Page 43)

42
PROGRAMMING CHANNEL LOCK
Channel control can be locked so that the Nova remote controls a single device’s channel-changing functions, regardless of operating mode. This
is often enabled by users who watch all broadcast TV through one device (e.g., a cable set-top box). The affected keys are 1 through 0, CH+,
CH-, and LAST. Locking All Channel Controls to One Device
To lock all channel-control functions to a specific device, follow these steps:
Press the mode key that relates to the device that you use for channel- changing control. 1.
Press and hold SET until the mode LED blinks twice, then release. 2.
Enter 9 7 3.The mode LED blinks twice. 3.
Press CH+ once. The mode LED blinks twice. 4.
Now, regardless of what mode you select, the channel keys will only change channels on the assigned device.
Unlocking Channel Locks
To unlock Channel Lock and thus allow the channel control functions to work with the device associated to the active operating mode, follow
these steps:
Press and hold SET until the mode LED blinks twice, then release. 1.
Enter 9 7 3. The mode LED blinks twice. 2.
Press CH- once. The mode LED blinks four times. 3.
Now the channel functions will correlate to the active mode (e.g., press CH+ in TV mode and the TV changes channel accordingly).
USING KEYMOVER
Your Nova universal remote control includes a Keymover feature that allows you to map (or copy) keys from one mode (i.e., source mode) to
another mode (i.e., destination mode) or to a different key in the same mode.
NOTE: Do not use any of the Device Keys, POWER, RECORD, or SET as a source or destination key.
Moving Keys in the Same Device Mode
Press the desired device key (TV, DVD, STB, or AUX). 1.
Press and hold SET until the LED blinks twice, then release. 2.
Press 9 9 4. The LED blinks twice. 3.
Press the key you want to move. 4.
Press the new key that should perform the function. The LED blinks twice. 5.
Repeat steps 1-5 to move additional keys. 6.
Moving Keys to a Different Device Mode
This lets you, for example, control DVD functions while in TV mode. You would move the transport key functions (Play, Stop, etc.) from DVD
mode to TV mode, as follows:
Press and hold SET until the LED blinks twice, then release. 1.
Press 9 9 4. The LED blinks twice. 2.
Press the device key that contains the function you want to move (e.g., DVD). 3.
Press the key you want to move (e.g., Play). 4.
Press the device key that you want to move the function to. (e.g., TV). 5.
Press the key in the new mode that should perform the function (e.g., Play). The LED blinks twice. 6.
Repeat steps 1-6 to move additional keys. 7.
Restoring All Keymoved Data in a Specific Mode
Press and hold SET until the LED blinks twice, then release. 1.
Press 9 9 4. The LED blinks twice. 2.
Press the device key you wish to remove all keymoved data from twice. The LED blinks twice. 3.
Repeat for each device you want to resto 4. re.
Restoring Original Key Function
Press the device key for which you wish to remove the keymoved data from a specific key. 1.
Press and hold SET until the LED blinks twice, then release. 2.
Enter 9 9 4. The LED blinks twice. 3.
Press the key you wish to remove the keymoved data from twice. The LED blinks twice. 4.
Repeat steps 1-4 for additional keys you wish to remove. 5.
PROGRAMMING MACROS
Your Nova universal remote control includes the ability to program any key (other than the SET key) with a Macro function. Each one can be
set up to perform a pre-programmed set of sequential key presses with the press of one key. A macro can be used to control a home theater
operation, to set a favorite channel, or for other multiple functions you would like to control with one key press. Moreover, each Macro Key can
hold up to 15 key presses total.
NOTE: Programming a new macro over an existing one erases the original macro.
Programming a Mode-Independent Macro
Press and hold SET until the red LED blinks twice, and then release. 1.
Press 9 9 5. The LED blinks twice. 2.
Press the key you wish to assign a macro on. 3.