beautypg.com

Antari HZ-500 User Manual

Page 8

background image

8

The display indicates the set time interval. The unit counts down to 0 seconds and emits haze. To

deactivate the timer mode, press the button TIMER again.

-Menu settings with the button FUNCTION

1.

Setting time intervals for timer operation

Press the button FUNCTION until the display indicates »Interval Set«. Use the buttons UP and DOWN to

adjust the intervals between the individual fog outputs in timer mode within the range of 1 and 200

seconds.

2.

Setting the output duration for timer operation

Press the button FUNCTION until the display indicates »Duration Set«. Use the buttons UP and DOWN to

adjust the duration of the fog outputs in timer mode within the range of 1 and 200 seconds.

3.

Setting the DMX512 address

Press the FUNCTION until the display indicates »DMX 512«. Use the buttons UP and DOWN, to set the

machine to the same address as on your DMX controller. Please refer to chapter DMX512 settings for

more information on DMX operation.

4.

Switching the door sensor on and off

Press the button FUNCTION until the display indicates »DOOR ON SENSOR«. Press the button

MANUAL to deactivate the door sensor (indication » DOOR OFF SENSOR «) and the button VOLUME to

reactivate it. Please see *Note 2.

5.

Direct haze

Press the button FUNCTION until the display indicates »Direct Haze«. Press the button MANUAL to

activate the direct haze mode. Then the machine directly starts producing haze after switching on the

power. The display indicates »Direct Haze« and starts flashing. To stop the haze output, shortly press

the button MANUAL again. The display stops flashing.

*

Note 1: The control of the master unit will override the control of the panel controller when

connecting the haze machine via DMX.

*

Note 2: If the haze outlet door sensor is activated (indication »DOOR ON SENSOR«), a warning

sound will beep when haze output is activated and the door is not completely open. The

flashes and indicates »DOOR CLOSED!!«. The haze production stops until the door is

completely opened. If the door sensor is not activated (indication »DOOR OFF

SENSOR«), this safety features will not occur.