AltiGen MAXCS 7.5 Polycom VVX User Guide - Manual (Page 8)

MAXCS 7.5 Polycom VVX User Guide
Page 8
Line Monitoring / BLF (Advanced License required)
If your administrator configured your extension to monitor other extensions, you will see those monitored extensions as
softkeys in Lines view.
• Red LED - That extension is connected to a call (or the extension is not registered with MAXCS yet)
• No LED - That extension is idle
• Green flashing LED – That extension is ringing
When a monitored extension is ringing, tap its softkey once to pick up the call. Tap only once - tapping twice will connect
and then immediately disconnect the call.
If your Administrator configured a “Splash Display” feature for you, you will briefly see an alert on your phone when the
monitored extension rings.
You can call a monitored extension by tapping it.
When a monitored extension is ringing, you can take these actions (if the administrator enabled the Splash Ring feature for
you):
• Tap Pickup to answer the incoming call
• Tap Ignore to dismiss the ring display and silence the ring
• Tap Silence to silence the ring
Line Park (Advanced License required)
To park a call,
1
While on a call, press the Home button to switch to Home view.
2 Tap any Line Park softkey to park the call on that line. Note that you will not hear a confirmation announcement.