AltiGen MAXCS 7.5 MaxSupervisor - Manual (Page 8)

4 MaxSupervisor Manual
Installing MaxSupervisor on a Client System
When the above items are done, follow these steps on the client
machine:
1. Close all Windows applications.
2. From the MAXCS installation media, open the MaxSupervisor
folder and run the Setup program. Follow the instructions on
the screen.
3. Alternatively, if your system administrator has loaded
MaxSupervisor on a shared network server, you can copy the
files in the MaxSupervisor folder to your desktop computer
and run the MaxSupervisor Setup program.
Uninstalling MaxSupervisor
To uninstall MaxSupervisor,
1. From the Windows Start menu, select Control Panel > Add/
Remove Programs. Choose MaxSupervisor.
2. Click Remove, and respond to any additional prompts.
Automatic Upgrade
Each time you start MaxSupervisor, a comparison is made with the
version of MAXCS ACM that is running on the server. If updates
were made on the server and your version of MaxSupervisor is
out-of-date, you are prompted for upgrade permission. If you
automatically upgrade, the MaxSupervisor startup is terminated
and a software upgrade session begins. Restart MaxSupervisor to
run the newer version.
Note: For remote MaxSupervisor users outside the firewall, TCP
port 10050 is required to be open to allow auto upgrade.
Also, automatic upgrade over the Internet requires the
sending of 15 MB files over the WAN, which may take some
time, to perform the automatic update.
Downgrade Procedure
1. Go to Control Panel > Add/Remove Programs and remove
MaxSupervisor 7.5 program and ALL OTHER 7.5 client