beautypg.com

Automatic transmission fluid – Acura 2001 RL - Owner's Manual User Manual

Page 231

background image

Automatic Transmission Fluid

Check the fluid level with the engine

at normal operating temperature.

1. Park the car on level ground. Shut

off the engine.

2. Remove the dipstick (yellow loop)

from the transmission and wipe it
with a clean cloth.

3. Insert the dipstick into the

transmission. Make sure the notch
in the rubber cap fits in the
dipstick guide and that you push
the dipstick in all the way.

4. Remove the dipstick and check

the fluid level. It should be
between the upper and lower
marks.

5. If the level is below the lower

mark, add fluid into the tube to
bring it to the upper mark. Always
use Honda ATF-Z1 (Automatic

Transmission Fluid). If it is not

available, you may use a
DEXRON

®

III automatic

transmission fluid as a temporary
replacement. However, continued
use can affect shift quality. Have
the transmission flushed and
refilled with Honda ATF-Z1 as

soon as it is convenient.

To thoroughly flush the
transmission, the technician

should drain and refill it with
Honda ATF-Z1 (Automatic

Transmission Fluid), then drive

the vehicle a short distance. Do
this three times. Then drain and
refill the transmission a final time.

Maintenance

DIPSTICK GUIDE

DIPSTICK

UPPER MARK
LOWER MARK

Main Menu

Table of Contents