Acura 2001 RL - Owner's Manual - Manual (Page 104)

Driving Position Memory System
Your Acura has a memory feature
for the steering wheel, driver's seat,
and outside mirror positions.
Two seat, steering wheel, and
outside mirror positions for different
drivers or driving conditions can be
stored in separate memories. You
select a memorized position by
pushing the appropriate button.
Storing a Driving Position in Memory
Store a driving position as explained
in this section only when the car is
parked.
1. Turn the ignition switch ON (II).
You cannot add a new driving
position in the memory unless the
ignition switch is ON (II). You can
recall a memorized position with
the ignition switch in any position.
2. Adjust the seat to a comfortable
position (see page 94 ). Adjust
the steering wheel to a
comfortable position (see page
71 ).
Adjust the outside mirrors for best
visibility (see page
99 ).
3. Press and release the MEMO
button on the control panel. You
will hear a beep. Immediately
press and hold one of the memory
buttons (1 or 2) until you hear two
beeps. The indicator light in the
memory button will come on. The
current positions of the driver's
seat, steering wheel, and outside
mirrors are now stored.
CONTINUED
Instruments and Controls
MEMO BUTTON
Main Menu Table of Contents