Acura 2005 RSX - Owner's Manual - Manual (Page 62)

Turn Signal
Off
Parking and interior lights
Headlight on
High beams
Flash high beams
Turning the
switch to the ‘‘ ’’ position turns
on the parking lights, taillights,
instrument panel lights, side-marker
lights, and rear license plate lights.
Turning the switch to the ‘‘ ’’
position turns on the headlights. If
you leave the lights on with the key
removed from the ignition switch,
you will hear a reminder beeper
when you open the driver’s door.
To turn on the high
beams, push the left lever forward
until it clicks. The blue high beam
indicator will come on (see page
).
Pull it back to return to low beams.
To flash the high beams, pull the
lever back lightly, then release it.
The high beams will stay on as long
as you hold the lever back.
Push down on the
left lever to signal a left turn and up
to signal a right turn. To signal a lane
change, push lightly on the lever and
hold it. The lever will return to
center when you release it or
complete a turn.
With the headlight switch off, the
high beam headlights come on with
reduced brightness when you turn
the ignition switch to ON (II) and
release the parking brake. They
remain on until you turn the ignition
switch off, even if you set the
parking brake.
The headlights revert to normal
operation when you turn them on
with the switch.
1.
2.
3.
4.
5.
6.
54
Canadian model only
Turn Signal and Headlights Daytime Running Lights
Headlights On
High Beams
Turn Signal
Turn Signal and Headlights
Inst
ru
m
e
nt
s
a
nd
Cont
ro
ls
61
Main Menu Table of Contents