beautypg.com

Service station procedures – Acura 2005 RSX - Owner's Manual User Manual

Page 125

background image

Pull the support rod out of its clip
and insert the end into the
designated hole in the hood.

To close the hood, lift it up slightly to
remove the support rod from the
hole. Put the support rod back into
its holding clip. Lower the hood to
about a foot (30 cm) above the
fender, then let it drop. Make sure it
is securely latched.

If the hood latch handle moves stiffly,
or if you can open the hood without
lifting the handle, the mechanism
should be cleaned and lubricated.

3.

Service Station Procedures

124

SUPPORT ROD

Main Menu

Table of Contents