beautypg.com

Lights – Acura 2007 TSX - Owner's Manual User Manual

Page 302

background image

Open the hood. To change a bulb
on the driver’s side, undo the
three fasteners and remove the air
intake cover.

Remove the electrical connector
from the bulb by pulling the
connector straight back.

Remove the rubber weather seal
by pulling on the tab.

Unclip the end of the hold-down
wire from its slot. Pivot it out of
the way, and remove the bulb
socket.

Pull the burned out bulb straight
out of its socket.
Push the new bulb straight into
the socket until it bottoms.

1.

2.

3.

4.

5.

CONTINUED

Lights

Ma

int
e

na
nce

299

FASTENER

AIR INTAKE COVER

HOLD-DOWN WIRE

BULB

CONNECTOR

RUBBER WEATHER SEAL

SOCKET

Main Menu

Table of Contents