Acura 2007 TSX - Owner's Manual - Manual (Page 221)

With your phone on and the
ignition in the ACCESSORY (I) or
ON (II) position, press and release
the Talk button. After the beep,
say ‘‘Phone setup.’’ The HFL
response is ‘‘Phone setup options
are status, pair, edit, delete, and
list.’’
Press and release the Talk button.
After the beep, say ‘‘Pair.’’ The
HFL response is ‘‘The pairing
process requires operation of your
mobile phone. For safety, only
perform this function while the
vehicle is stopped. State a four-
digit code for pairing. Note this
code. It will be requested by the
phone.’’
Press and release the Talk button.
After the beep, say the four-digit
code you want to use. For example,
say ‘‘1, 2, 3, 4.’’ The HFL response
is, ‘‘1, 2, 3, 4. Is this correct?’’
Press and release the Talk button.
After the beep, say the name you
want to use. For example, say
‘‘Eric’s phone.’’ The HFL response
is ‘‘Eric’s phone has been
successfully paired. Returning to
the main menu.’’
If you want to pair another phone,
repeat steps 1 through 7.
Press and release the Talk button.
After the beep, say ‘‘Yes.’’ The
HFL response is ‘‘Searching for a
Bluetooth phone.’’
Steps 5 and 6 show a
common way to get your phone into
its Discovery mode. If these steps do
not work on your phone, refer to the
phone’s operating manual.
Follow the prompts on your phone
to get it into its Discovery mode.
The phone will search for the HFL.
When it comes up, select
HandsFreeLink from the list of
options displayed on your phone.
When asked by the phone, enter
the four-digit code from step 3 into
your phone. The HFL response is
‘‘A new phone has been found.
What would you like to name this
phone?’’
1. 4.
5.
6.
7.
2.
3.
8.
HandsFreeLink
218
NOTE:
TM
Main Menu Table of Contents