Acura 2007 TSX - Owner's Manual - Manual (Page 219)

Press and release the Talk button.
After the beep, say ‘‘Ring tone’’ or
‘‘Prompt.’’ The HFT system
response is ‘‘A ring tone will be
used.’’ or ‘‘An incoming call
prompt will be used.’’
If you choose ‘‘Ring tone,’’ you will
hear a ring tone through the audio
speakers to announce an incoming
call. If you choose ‘‘Prompt,’’ you
will hear this message to
announce an incoming call: ‘‘You
have an incoming call.’’
The HFL will accept a numeric, four-
digit passcode that you can use for
security purposes.
Press and release the Talk button.
After the beep, say the four-digit
passcode you want to use. For
example, say ‘‘1, 2, 3, 4.’’ The HFL
response is ‘‘1, 2, 3, 4. Is this
correct?’’
Press and release the Talk button.
If you say ‘‘Yes’’ after the beep, the
HFL system response is, ‘‘Would
you like the notification to be a
ring tone or a prompt?’’ If you say
‘‘No’’ after the beep, the HFL
system returns to its main menu.
Saying ‘‘No’’ will result in no ring
tone or prompt playback during an
incoming call. The audio system
will be mute, and a message will
be displayed. The HFL response continues ‘‘A
security option is available to lock
the HFL. Each time the vehicle is
turned on, a passcode would be
required to use this system. Would
you like this security option turned
on?’’ If you say ‘‘Yes,’’ you can set
your passcode. Refer to the setting
procedure in the next column.
Follow the system setup
procedure as described previously.
Press and release the Talk button.
After the beep, say ‘‘Yes.’’
The HFL response is ‘‘What is the
four-digit number you would like
to set as your passcode?’’
4.
5.
4.
1.
2.
3.
6.
To set your passcode, do this:
HandsFreeLink
Setting Your Passcode
216
TM
Main Menu Table of Contents