Acura 2007 TSX - Owner's Manual User Manual

Page 146

CONTINUED

To select a memorized position, do
this:

Make sure the parking brake is set
(M/T) or the shift lever is in Park
(A/T).

Press the desired memory button
(1 or 2) until you hear a beep.

Doing any of the following after
pressing the MEMO button will
cancel the storing procedure.

Not pressing a memory button
within 5 seconds.

Readjusting the seat position.

Each memory button stores only one
driving position. Storing a new
position erases the previous setting
stored in that button’s memory. If
you want to add a new position while
retaining the current one, use the
other memory button.

All stored driving positions will be
lost if your vehicle’s battery goes
dead or is disconnected.

Pressing the MEMO button again
within 5 seconds.

Press and release the MEMO
button on the driver’s door. You
will hear a beep. Then, both
indicators in the memory buttons
will start to blink. Press and hold
one of the memory buttons (1 or
2) within 5 seconds after you press
the MEMO button. When the
system completes storing a new
driving position, you hear two
beeps. The indicator in the stored
memory button will come on.

Driving Position Memory System

Selecting a Memorized Position

Inst

nt
s

Cont

143

MEMORY BUTTONS

MEMO BUTTON

INDICATORS

Main Menu

Table of Contents