Acura 2012 TL - Advanced Technology Guide - Manual (Page 6)

8
T i r e P r e s s u r e M o n i t o r i n g S y s t e m
Alerts you when one or more of your tires has significantly low pressure. Toggle
to the tire pressure monitor display to view pressure readings on the MID.
H o w I t W o r k s
W h a t t o D o
1. Visually inspect the tires for
damage.
2. Use a tire air pressure gauge
(or check the MID) to check
which tire(s) have low pressure.
3. Inflate the tire(s), if necessary,
to the recommended pressures
listed on the label on the
driver’s doorjamb.
9
If the tire pressure drops significantly below recommended levels:
• The low tire pressure indicator comes on.
• A “CHECK TIRE PRESSURE” message appears on the MID, showing
which tire(s) have low pressure.
2. Check the MID:
• If you have the correct remote, the driver ID that appears first on
the MID will match the ID number on the back of your remote.
Go to step 3.
• If the numbers do not match, follow these simple instructions:
- Turn the vehicle off.
- Press the unlock button on your remote.
- Turn the vehicle on again, and check the MID. The driver ID
that appears first on the MID should now match the number
on the back of your remote.
C U S T O M I Z E D S E T T I N G S
Each remote (labeled 1 or 2 on the back) activates its own set of
programmable audio, climate, driving position memory, and customized
settings (MID).
1. Verify that you are using the correct remote by turning the vehicle
on.
C h e c k i n g t h e R e m o t e
3. Once you have the correct remote, you can begin to program your
settings.
Tech/Advance model shown
12 TL ATG:ATG_NEW STYLE 1/27/2011 1:31 PM Page 6