Acura 2014 RLX Hybrid - Owner's Manual - Manual (Page 414)

413
uu When Driving u Blind Spot Information (BSI) System
Driving
■ When the system detects a vehicle 1 Blind Spot Information (BSI) System
You can change the setting for BSI.
2 Customized Features P. 117, 288
BSI may be adversely affected when:
• Objects (guard rails, poles, trees, etc,.) are
detected.
• An object that does not reflect radio waves well,
such as a motorcycle, is in the alert zone.
• Driving on a curved road.
• A vehicle is moving from a far lane to the adjacent
lane.
• The system picks up external electrical interference.
• The rear bumper or the sensors have been improperly
repaired or the rear bumper has been deformed.
• The orientation of the sensors has been changed.
• In bad weather (Heavy rain, snow, and fog).
For proper BSI operation:
• Always keep the rear bumper corner area clean.
• Do not cover the rear bumper corner area with
labels or stickers of any kind.
• Take your vehicle to a dealer if you need the rear
bumper corner area or the radar sensors to be repaired,
or the rear bumper corner area is strongly impacted.
Comes on when:
● A vehicle enters the alert zone from behind
to overtake you with a speed difference of
no more than 31 mph (50 km/h) from your
vehicle.
● You pass a vehicle with a speed difference
of no more than 12 mph (20 km/h).
BSI Alert Indicator: Located near the outside
rearview mirror on both sides.
Blinks and a beeper sounds when:
You move the turn signal lever in the direction
of the detected vehicle. The beeper sounds
three times.
Comes On
Blinks
15 ACURA RLX E-AWD-31TY36100.book 413 ページ ２０１４年８月６日 水曜日 午後１時５９分