Acura 2014 RLX Hybrid - Owner's Manual - Manual (Page 374)

Continued 373
uu When Driving u Shifting
Driving
■ Shift Operation 1 Shift Operation
NOTICE
When you change ( D to ( R and vice versa, come to
a complete stop and keep the brake pedal depressed.
Operating the shift button before the vehicle has
come to a complete standstill can damage the
transmission.
Use the gear position indicator and the shift button
indicator to check the gear position before selecting
a shift button.
If the indicator of the currently selected gear position,
or all the gear position indicators are blinking
simultaneously, there is a problem with the
transmission.
Avoid sudden acceleration and have the transmission
checked by a dealer as soon as possible.
The fuel supply may be cut off if you drive at engine
speeds in or over the tachometer’s red zone (engine
speed limit). If this happens, you may experience a
slight jolt.
When the engine speed is increased while the
transmission is in
( N, ( P or ( R, the fuel supply may
be cut off even without the engine speed entering
the tachometer’s red zone.
The beeper sounds once when you change to ( R.
Gear Position Indicator
Tachometer’s red zone
Press the ( P button.
Press back the ( R button.
Press the ( N button.
Press the ( D button.
Shift Button
Indicator
M (sequential mode)
Indicator
Sequential Mode Gear
Selection Indicator
15 ACURA RLX E-AWD-31TY36100.book 373 ページ ２０１４年８月６日 水曜日 午後１時５９分