AAF International SAH - Manual (Page 4)

1.4 Product Model Designations
The SAH model is designated as follows:
SAH - 202 – 2P – MD– F – MD – 2P – 6F
Supports a 6" deep particulate final filter, if required
Supports a 2" deep particulate after-filter, if required
Second gas-phase chemical filter bank, if required, supports Type MD cassettes
Fan
First gas-phase chemical filter bank, supports Type MD cassettes
Supports a 2" deep particulate pre-filter, if required
Is nominally 2' high x 2' wide
Side Access Housing
4
6" high x 24" wide x 18" deep Type MD cassette ships in two halves.
1.3.2 continued
12" high x 24" wide x 12" deep Type HD cassette ships in two halves.
24" high x 12" wide x 12" deep Type CG cassette ships in one piece.
The three (3) types of gas-phase chemical filter cassettes that can be
supplied are as follows:
1.3.3 Particulate filters:
Prefilters and after-filters - Particulate prefilters and after-filters
will typically be AAF PerfectPleat ® pleated filters. Depending on the
size of the Side Access Housing (SAH) ordered 24" high x 24" wide
x 2" deep full size filters, 24" high x 12" wide x 2" deep or 12" high
x 24" wide x 2" deep half-size filters may be supplied. PerfectPleat
2" deep filters are packaged 12 to a carton.
High efficiency filters – High efficiency filters will typically be AAF
M-Pak pleated filters. Depending on the size of the Side Access
Housing (SAH) ordered 24" high x 24" wide x 6" deep full size
filters, 24" high x 12" wide x 6" deep or 12" high x 24" wide x 6"
deep half size filters may be supplied. M-Pak filters are packaged 2
to a carton.
Note that other optional or special filter arrangements may be
supplied depending on the requirements of the project. Check the
purchase order and the AAF submittal drawing(s) for details.