A&D Weighing AD-1690 - Manual (Page 17)

15
(4) Setting mode
A) Selecting the procedure for measurement result
- The 5et procedure is displayed.
- Press the １ UP or DOWN key to select either
5et off or 5et on.
5et off：After measurement, Leak Tester display
the only judgment result (pa55 or
fa1l).
5et on：After measurement, Leak Tester display
the final pressure after displaying the
judgment result.
- Press the SET key to store the setting.
The display is in the next setting mode.
(5if or end)
* Factory setting: 5et off
B) Setting the output format of the serial interface
- The type procedure is displayed.
- Press the
１ UP or DOWN key to select either
type 0 or type 1.
type 0：The setting to connect the Leak Tester to
either an AD-1688，PC，or AD-8121B.
type 1：The setting to output the date and time
by an AD-8121B.
(The date and time are added before each data
set)
- Press the SET key to store the setting.
The display is in the next setting mode.
(re5Ult or end)
* Factory setting: 5et off
Approx. 1 second
PASS
k P a
DOWN UP
SET
SIF
P C
SIF
P r n
Continued from (3 on page 13)
or
press
The setting is stored in memory..
The display is in the next setting
mode (re5Ult or end).
Continued from (3 on page 13)
The setting is stored in memory.
The display is in the next setting
mode (5if or end).
or
press
DOWN UP
SET
RESL
RESL