A&D Weighing SG-30KA - Manual (Page 13)

SF/SG Series Operating Instructions
F1: Auto display off 0: Yes 1: No
F2: Cancellation of unit price 0: Selectable 1: No 2: Yes
F3: Output Data 0: Key trigger mode 1 1: Key trigger mode 2
(Refer to the note below.) 2: Command mode 3: Stream mode
4: Key trigger mode 3 with delay
5: Key trigger mode 3 without delay
6: Not used
7: Not used
8: Label printer mode
F4: Baud Rate 0: 600 bps 1: 1200 bps
2: 2400 bps 3: 4800 bps 4: 9600 bps
F5: Parity Bit 0: 7 bits (Even) 1: 8 bits (No parity)
F6 and F7: Not used Normally F6=0, F7=1
12
Note: A scale that has totaling and multiplier functions can use F3 = 4 or 5.
F3=8 is used when the SF/SG scale is connected to an AD-8124 label printer.
Settings