Panasonic NV-SJ230A - Manual (Page 8)

Example:
If you want to delete Channel 6,
1 Press the MENU button to display the Main menu on
the TV screen.
Press the Cursor buttons (A V) ©
to select [CH ADD&DELETE] then
press the OK button
Press the Cursor buttons ( A T ) ^
to select the desired programme
position (example CH3) then press
the Cursor button (-4) © to select
[DELETE],
On Screen Display
. . . . .
CLOCK SET
TUNER PRESET
CH ADD60ELETE
SYSTEM
OPTION
CLOCKSET
TUNER PRESET
» CH ADD&OELETE
SYSTEM
OPTION
CHAOD&DELETH CHADO&DitETE
Programme
Position
Channel
1 2
2 4
4 8
5 10
6 12
7 -
8 -
- Deleting a channel shifts the programme positions of
Channel 8 to Channel 12 down, as shown in the list
above.
- The list of the programme positions do not appear on
the On Screen Display.
- Repeat step 3 for each of the other programme
positions.
4 Press the MENU button © twice to exit the On Screen
Display.
Setting the Clock of Your VCR
programme
Position
Channel
1 2
2 4
3 8
4 10
5 12
6 -
7 -
8 -
The clock will operate for at least 3 years in total after it has
been set, - in the event of a power failure, it will operate on its
backup system. After 3 years, it will only operate for 1 hour on
its backup system.
Preparations
- Confirm that the TV is on and the VCR viewing channel is
selected.
- Turn on the VCR.
Example:
Date; 16 October, 2005
Time; 20:15
Operations
•■CLOCK SET
TUNER PRESET
CH ADD&PELETE
SYSTEM
OPTION
..... ■ ■-W "
^CLOCKSET
TUNER PRESET
CH ADD&DELETE
SYSTEM
OPTION
Press the MENU button © to display
the Main menu on the TV screen.
Press the Cursor buttons ( A T ) ©
to select [CLOCK SET] then press
the OK button 0.
Set each item by pressing the
Cursor buttons ( A T P " ) ©. Press
the Cursor button i-^^) © to return to
the previous item.
At the set time (H:M) point:
- When it is kept pressed, the
indication changes in 30 minute
steps.
- There is no need to press the
Cursor button {>■) ©.
Press the MENU button ©.
- The clock starts.
Time Reset Function
If the clock is less than two minutes slow or fast, it can easily
be reset to the proper time.
Example:
Resetting the clock to 12:00.00
VCR display
1 Press the MENU button © to display the Main menu on
the TV screen.
2 Press the Cursor buttons ( A T ) © to select [CLCCK SET]
then press the OK button ©.
3 When the current clock display on the VCR is between
11:58.00 and 12:01.59, press the MENU button © as
soon as you hear the 12:00.00 signal. This resets the time
to 12:00.00.