Clarion DFZ675MC - Manual (Page 25)

29
DFZ675MC
English
TV Operations
TV tuner functions
When an optional TV tuner is connected through
the CeNET cable, this unit controls all TV tuner
functions. To watch TV requires a TV tuner and
monitor.
Watching a TV
1. Press the [SRC] button and select the TV
mode.
2. Press the [BND] button to select the desired
TV band (TV1 or TV2). Each time the button
is pressed, the input selection toggles
between TV1 and TV2.
3. Press the [ R] or [F] button to tune in the
desired TV station.
Watching a video
The TV tuner has a VTR input terminal to which
1 external device can be connected. Connect a
12 V video cassette player (VCP) or video
cassette recorder (VCR) to the TV tuner input
terminal.
1. Press and hold the [A] button for 1 second or
longer to select VTR.
2. To return to the TV broadcast, press and hold
the [A] button for 1 second or longer.
Tuning
There are 3 types of tuning mode available, seek
tuning, manual tuning and preset tuning.
Seek tuning
1. Press the [BND] button and select the desired
TV band (TV1 or TV2).
* If “MANU” is lit in the display, press and hold
the [BND] button for 1 second or longer.
“MANU” in the display goes off and seek tuning
is now available.
2. Press the [ R] or [F] button to
automatically seek a station. Press the [ F]
button to automatically tune up the frequency
band to the next available TV station; press
the [
R] button to automatically tune down.
Manual tuning
There are 2 ways available: Quick tuning and
step tuning.
When you are in the step tuning mode, the
frequency changes one step at a time. In the
quick tuning mode, you can quickly tune the
desired frequency.
1. Press the [BND] button and select the desired
band (TV1 or TV2).
* If “MANU” is not lit in the display, press and
hold the [BND] button for 1 second or longer.
“MANU” lights in the display and manual tuning
is now available.
2. Tune into a station.
●Quick tuning:
1. Press and hold the [
R] or [F] button for 1
second or longer to tune in a station.
●Step tuning:
1. Press the [
R] or [F] button to manually
tune in a station.
Recalling a preset station
A total of 12 TV stations can be stored (6-TV1
and 6-TV2). This allows you to select your
favorite TV stations and store them in memory for
later recall.
1. Press the [BND] button and select the desired
TV band (TV1 or TV2).
2. To recall a stored TV station, press the
desired [DIRECT] button to select that station.
Notes:
• Be careful not to press and hold one of the
[DIRECT] buttons for 2 seconds or longer,
otherwise the unit starts storing that station into
preset memory.
Manual memory
1. Select the desired station with seek tuning,
manual tuning or preset tuning.
2. Press and hold one of [DIRECT] buttons for 2
seconds or longer to store the current station
into preset memory.