Clarion DFZ675MC - Manual (Page 11)

15
DFZ675MC
English
Radio Operations
Listening to the radio
1. Press the [SRC] button and select the radio
mode. The frequency appears in the display.
2. Press the [BND] button and select the radio
band. Each time the button is pressed, the
radio reception band changes in the following
order:
“FM1”
➜ “FM2” ➜ “FM3” ➜ “AM” ➜ “FM1”...
3. Press the [ R] or [F] button to tune in the
desired station.
Tuning
There are 3 types of tuning mode available, seek
tuning, manual tuning and preset tuning.
Seek tuning
1. Press the [BND] button and select the desired
band (FM or AM).
* If “MANU” is lit in the display, press and hold
the [BND] button for 1 second or longer.
“MANU” in the display goes off and seek tuning
is now available.
2. Press the [ R] or [F] button to
automatically seek a station.
When the [
F] button is pressed, the station
is sought in the direction of higher
frequencies; if the [
R] button is pressed, the
station is sought in the direction of lower
frequencies.
Manual tuning
There are 2 ways available: Quick tuning and
step tuning.
When you are in the step tuning mode, the
frequency changes one step at a time. In the
quick tuning mode, you can quickly tune the
desired frequency.
1. Press the [BND] button and select the desired
band (FM or AM).
* If “MANU” is not lit in the display, press and
hold the [BND] button for 1 second or longer.
“MANU” is lit in the display and manual tuning
is now available.
2. Tune into a station.
●Quick tuning:
1. Press and hold the [
R] or [F] button for 1
second or longer to tune in a station.
●Step tuning:
1. Press the [
R] or [F] button to manually
tune in a station.
Recalling a preset station
A total of 24 preset positions (6-FM1, 6-FM2, 6-
FM3, 6-AM) exists to store individual radio
stations in memory. Pressing the corresponding
[DIRECT] button recalls the stored radio
frequency automatically.
1. Press the [BND] button and select the desired
band (FM or AM).
2. Press the corresponding [DIRECT] button to
recall the stored station.
Notes:
• Be careful not to press and hold one of the
[DIRECT] buttons for 2 seconds or longer,
otherwise the unit starts storing that station into
preset memory.
Manual memory
1. Select the desired station with seek tuning,
manual tuning or preset tuning.
2. Press and hold one of the [DIRECT] buttons
for 2 seconds or longer to store the current
station into preset memory.
Auto store
Auto store is a function for storing up to 6 stations
that are automatically tuned in sequentially. If 6
receivable stations cannot be received, a
previously stored station remains unoverwritten
at the memory position.
1. Press the [BND] button and select the desired
band (FM or AM).
2. Press and hold the [ h] button for 2 seconds
or longer. The stations with good reception
are stored automatically to the preset
channels.
Preset scan
Preset scan receives the stations stored in preset
memory in order. This function is useful when
searching for a desired station in memory.
1. Press the [
h] button.
2. When a desired station is tuned in, press the
[ h] button again to continue receiving that
station.
Notes:
• Be careful not to press and hold the [
h
] button for
2 seconds or longer, otherwise the auto store
function is engaged and the unit starts storing
stations.