Kofax Communication Server 9.1.1 - Manual (Page 6)

Changes in Behavior
6 Kofax Communication Server Release Notes
TC/LINK-SM Temporary Directory
The default temporary work directory of links based on TC/LINK-SM is now changed from
C:\TEMP\
to
C:\TCOSS\TCLP\WORK\
. The directory is created
automatically if it does not exist on link startup. (SPR00070431)
This applies only to new installations.
The following links are affected:
▪ TC/LINK-SM-OC
▪ TC/LINK-MX7
▪ TC/LINK-SC7
▪ TC/LINK-SDD
▪ TC/LINK-MFP
For more information, see:
▪ TC/LINK-MX7 Technical Manual, version 1.01.06 edition 8
Chapter Installation - Prerequisites
▪ TC/LINK-SM / TC-LINK-OC Technical Manual, version 2.07.00 edition 2
Chapter Installation - Prerequisites
TC/Probe Not Working for TC/LINK-MX7
TC/Probe is now properly working with TC/LINK-MX7. An additional installation step
is necessary: You need to create a TCOSS service for sending to TC/Probe. (SPR00070752,
SPR00089499)
Use the following service settings:
▪ As the address type, select “Free address”.
▪ As the prefix, use the probe agent user name followed by a colon, for example
“TCPROBE:”
▪ Support text, image, restricted text, and binary.
This service will be used in the sender address of all Probe messages. Probe destinations must
support sending to this service. For Lotus Notes, this means that a foreign domain has to be
created for the service.
TC/Probe and TC/LINK-MX7 have to be restarted after creating the service.
If you use TC/PROBE also for monitoring SMS traffic (TC/LINK-WM or TC/LINK-MD),
additional steps are needed:
▪ Start the registry editor and go to the Probe subkey of the link instance.
▪ Write the probe user name into the registry value Probe\ProbeAgent.
▪ Write the probe service name into the registry value Probe\ProbeService.
These registry values are used by TC/LINK-WM and TC/LINK-MD map files.