Kistler-Morse KM Junction Box - Manual (Page 7)

3
www.kistlermorse.com
97-1076-01 Rev. B
III. PRODUCT DESCRIPTION
FUNCTION
Junction Boxes (J-Box) are used with bolt-on sensors and direct support products to assemble all connections,
wires and fittings.
FEATURES
• Half or full bridge circuits available
• Adjustable watertight strain relief fittings are provided for the sensor cable with plugs provided for
unused cable entry holes
• Water seal design consists of knife-edge contact with a flat gasket between the cover and box resulting
in high contact pressure to keep moisture out
• Cable and conduit entry holes are in the bottom of the junction box to protect against water seepage
TECHNICAL SPECIFICATIONS
PHYSCIAL
STAINLESS STEEL
Dimensions
5.9 x 4.2 in. (15 x 11 cm)
Approval NEMA 4X
Options One hole, 3/4 in. conduit entry
Two hole, PG13.5 conduit entry
PLASTICS
Dimensions
4.7 x 5.7 in. (12 x 12 cm)
Approval NEMA 4X
Options One hole, 3/4 in. conduit entry
Two hole, PG13.5 conduit entry
ALUMINUM (ADALET, IN-LINE)
Dimensions
Adalet, Four hole 1/4 in. conduit entry
Approval NEMA 7